Water-Based Finishes: What Should You Know About Them?

By: Megan Cherry

It’s true that many believe water-based finishes are safer than other finishes, and that they are also safer to handle. However, water-based finishes still use some of the same resins used in urethane and acrylic finishes. Water-based finishes are indeed much safer than traditional lacquers, but you should still be careful when you use them. Most of you have used latex paint before. Therefore, you know that the fumes can be quite intense, especially in an enclosed space. This is also true for water-based finishes, and you’ll want to take proper precautions to protect both your skin and lungs. Make sure there’s adequate ventilation, wear proper protective clothing, and wear a respirator as well.

Many harmful additives have been replaced by water in these types of finishes. The resins are not easily mixed with water, though, so they have to be chemically modified in order to be emulsified with the water. These require chemicals called surfaces and solvents to be added; among these are glycol ethers, which force resins to mix with water.

Yet another problem with water-based finishes is that the water will often raise the grain in the wood. Try this sometime. Sand a piece of wood and then rub some plain water on it. You’ll notice that the wood fibers will absorb the water and swell, which makes them “stand up” and roughen. To get around this problem, you can use a seal or coat of shellac. This will add a barrier between the wood and the next coat of finish. It will also give your wood a little bit of an amber color. Alternatively, you can use a couple of light coats of standing sealer. Once the standing sealer has dried, you can lightly sand the wood, which will smooth it out.

Fortunately, though, water finishes are of a neutral color, which means that they don’t add any color to the wood as other finishes might. Other lacquers might cause a slight amber color to the wood. Therefore, if you want to keep your wood’s natural color without any distortion whatsoever, a water-based finish is a great choice. However, there are certain woods that do not do best with a water-based finish. These are the darker woods such as cherry or walnut. If a water-based finish is applied, this tends to “tone down” the color of the wood so that the deep rich wood color is somewhat negated with a water-based finish.

Therefore, water-based finishes have both pros and cons. Pros are that they are not flammable and are less polluting than traditional finishes are, they don’t yellow, dry fast and can be either sprayed on or applied with a brush.

Water-Based Finishes: What Should You Know About Them?
Water-Based Finishes: What Should You Know About Them? By: Megan Cherry It's true that many believe water-based finishes are safer than other fi...

Home Selling Tips - Staging Finishes
Home Selling Tips - Staging FinishesBy Sanjog Gopal Most smart buyers know what it takes to generate interest in a home. There are, of course, ...

7 Proven Steps To Stop Your Pool From Going Green Ever Again
7 Proven Steps To Stop Your Pool From Going Green Ever AgainBy Michael Silvester Step 1: Put in an algaecide Buy 2 bottles...put in a whole bo...

Landscape Drainage - How To Prevent Drainage Problems On Your Property
Landscape Drainage - How To Prevent Drainage Problems On Your Property By: Susan Schlenger A landscape design should include plans for landscape...

Six Variations on the Common Shower
Six Variations on the Common ShowerBy: Ray Dobson When we think of showers, most of us imagine a simple shower-bath or stand-up shower with a curtain....

However, they have drawbacks too. Most cannot give wood a deep, rich color as we are used to with a solvent-based finish. In addition, the water raises the wood’s grain and can be very difficult to apply, since humidity and temperature play a role in both application and drying times.

In addition, with water-based finishes, the tools you’ll need will be slightly different than those with solvent-based finishes. For example, steel wool will rust quickly with water-based finishes, and natural bristle brushes will absorb too much water and become limp. In addition, if you’re using either a conventional or high-volume low-pressure spray gun, you’ll need to have stainless steel needles and nozzles so that corrosion does not happen.

Article Source:
http://www.articlecity.com/articles/home_improvement/article_3271.shtml


.

Author:
admin
Time:
Tuesday, September 16th, 2008 at 3:17 pm
Category:
Real Estate information
Comments:
You can leave a response, or trackback from your own site.
RSS:
You can follow any responses to this entry through the RSS 2.0 feed.
Navigation:

Leave a Reply

Preview on Feedage: realestate-sitecom
Add to My Yahoo! RealEstate-site.com
Add to Google! RealEstate-site.com
Add to AOL! RealEstate-site.com
Add to MSN RealEstate-site.com
Subscribe in NewsGator Online RealEstate-site.com
Add to Netvibes RealEstate-site.com
Subscribe in Pakeflakes RealEstate-site.com
Subscribe in Bloglines RealEstate-site.com
Add to Alesti RSS Reader RealEstate-site.com
Add to RSS Web Reader RealEstate-site.com
View with Feed Reader RealEstate-site.com
Add to NewsBurst RealEstate-site.com
Add to meta RSS RealEstate-site.com
Add to Windows Live RealEstate-site.com
  • Partner links

  • Simple Webmaster Advice blog directory PageRank Checking Icon